• Airbag warning light is on
• Airbag system may not deploy in a crash
• Possible error message on dashboard
• Faulty frontal impact sensor
• Damaged wiring or connectors in the sensor circuit
• Faulty airbag control module
OBD-II: On-Board Diagnostics, a standardized system for self-diagnostics and reporting in vehicles.
Frontal Impact Sensor: A sensor that detects frontal collisions and triggers airbag deployment.
• B0110
• B0112
This code means there's a problem with the airbag system in your car. It's like a warning light telling you that something might not work right if you get into an accident.
B0111 is an OBD-II code that indicates a fault in the airbag system, specifically related to the frontal sensor.
The B0111 code is triggered when there is a malfunction in the frontal impact sensor circuit. This sensor is part of the airbag system and is responsible for detecting frontal collisions and triggering the airbag deployment.
• Use an OBD-II scanner to confirm the B0111 code.
• Inspect the frontal impact sensor and its wiring for damage.
• Test the sensor and circuit with a multimeter.
• Replace the faulty frontal impact sensor.
• Repair or replace damaged wiring or connectors.
• Reset the airbag system and clear the code.
• OBD-II scanner
• Multimeter
• Socket set
$150 - $400
Moderate
• Chevrolet Impala
• Ford F-150
• Toyota Camry
• Regularly inspect airbag system components.
• Avoid water exposure to sensor areas.
• Perform routine diagnostic checks.
Sensor Issue
• Do not ignore the airbag warning light.
• Have the vehicle inspected by a professional.
• Avoid driving until the issue is resolved if possible.
Check with your vehicle manufacturer as airbag systems might be covered under extended warranty.
This code has been associated with vehicles that have experienced frontal impact sensor failures due to corrosion or physical damage.
High – Airbag system issues can compromise safety in the event of a collision.
Driving with a malfunctioning airbag system can be dangerous and may not comply with vehicle safety regulations.
• Vehicle must be stationary.
• Ignition must be in the 'on' position.
The frontal impact sensor is typically located at the front of the vehicle, near the bumper or radiator support.
Q: Can I drive with the B0111 code?
A: It's not recommended to drive with this code as it indicates a problem with the airbag system, which is crucial for safety in a crash.
Q: How do I reset the airbag warning light?
A: After repairs, use an OBD-II scanner to clear the code and reset the airbag system.
